
Impedance check
Exclusive system developed by Cometa that automatically checks the impedance of the skin during the pre-acquisition phase. Each electrode has a dedicated circuit to measure the impedance of the electrode/skin contact; if it is abo...read more

Fixed Delay 13
All our EMG systems have been developed in order to have a fixed delay from the acquisition of the signal to the analog output. This means that the delay is easily removable when using the EMG synchronized with other systems. The delay...read more

Fixed Delay 14
All our EMG systems have been developed in order to have a fixed delay from the acquisition of the signal to the analog output. This means that the delay is easily removable when using the EMG synchronized with other systems. The delay...read more

Diversity receiver
The «Diversity Mode» technology used by our EMG systems minimizes the effect of wave reflections from walls or objects; this is always present when working indoor.These reflections lead to some «black spots» in the working area, where ra...read more

Analog Board 18
Wave/Zerowire old systems were equipped with an 18 pin analog output, allowing the synch via analog cables of 16 EMG sensors and 2 FSW sensors. This output is by default equipped on all Wave/Zerowire receivers sold over the years.

Analog board 66
Our analog board (Wave Plus) is the only one in the EMG world that can carry out the data of sixty-six channels simultaneously. We use top quality components to ensure the highest quality transmission of 16 EMG, 48 accelerometers an...read more

Synchronous data logger
With this technique, transmitter n. 1 is the master of synchronization, while the other transmitters are slave. Transmitter n. 1 will take the role normally reserved for the USB receiver, and will keep all other transmitters perfectly synchronized...read more

Inductive recharge
The inductive recharge technique for EMG and inertial transmitter has been develop by Cometa and has been used in all our systems since 2005. The main advantage of this solution is the total absence of metal contacts on the transmitter box, allowi...read more